Page 2 of 2
Re: BK Model Bash Plate
Posted: Wed Nov 02, 2011 10:49 am
by Greg_SA
KaiV wrote:From Charlie Brown. Works like a charm
My only complaint is that it seems that the Agents are not in possession of a allan key to remove the plate under the oil filter. So, either they take off the whole bashplate (and not put it back properly
) or they do it insitu, leaving your car dripping oil off the bashplate......
Yep, I hear you! I also have a Lynx bash plate, and 2 bolts were stripped by the agents already. I now remove the "oil drain access cover" before a service, and put a sticker on the back plate that says "Do not remove!"
Re: BK Model Bash Plate
Posted: Wed Nov 02, 2011 9:03 pm
by harras
Hi Guys
I have spoken to Lynx and they have moved premises. They will only be able to help with a bash plate in+/- 3 to 4 weeks. Price R2900. The gents are Front Runner informed me that the CK sump plate will now also fit the BK model at R1450 and the belly plate which is made specificly for the BK is also R1450. This is also = R2900. Then I contacted Uys at Stofpad 4x4 and he have stock and the price is R2450. I will get one from Uys some time this week or early next week. Thanks for all the info and advise.
Harry
Re: BK Model Bash Plate
Posted: Wed Nov 02, 2011 9:21 pm
by harras
cloyd wrote:Harras,
Nee jong, lyk vir my jy het nou lui geword??
Cloyd
Hi Cloyd,
Nie lui nie maar gebuig. Ek het die spiere in my een arm geskeur
toe ek die RTT op die dak gesit het. Nou vat ek dit bietjie rustig
Harry
Re: BK Model Bash Plate
Posted: Thu Nov 03, 2011 8:27 am
by Gemaskerde Tuinvurk
harras wrote:Hi Guys
I have spoken to Lynx and they have moved premises. They will only be able to help with a bash plate in+/- 3 to 4 weeks. Price R2900. The gents are Front Runner informed me that the CK sump plate will now also fit the BK model at R1450 and the belly plate which is made specificly for the BK is also R1450. This is also = R2900. Then I contacted Uys at Stofpad 4x4 and he have stock and the price is R2450. I will get one from Uys some time this week or early next week. Thanks for all the info and advise.
Harry
so Uys has already made one for the BK?
schweet
as I said, I'm 2 months behind!
Re: BK Model Bash Plate
Posted: Mon Jan 30, 2012 2:22 pm
by sulcata
Gemaskerde Tuinvurk wrote:Harras, I'm going to Uys (Stofpad4x4) next week Friday to get my Gen4 measured. I'm keen on a bashplates for the front / sump and the gearbox as well. I'll ask him to measure for rock sliders as well (for those who are interested).
Lynx quoted me R5500 for both plates, Uys was R3850 for both (although the quotes are 2 months old).
I know Uys is not always the most Pajero friendly guy (he drives a Toy Tuna afterall), but he seems like quite a nice guy and I've seen only good feedback about his plates. I believe Lynx is also very good, so it might just come down to price for me at the end.
Will let you know...
Hi Tuinvurk, where can I get contact details for Lynx & stofpad?
Re: BK Model Bash Plate
Posted: Mon Jan 30, 2012 10:38 pm
by Gemaskerde Tuinvurk
Uys van Rooyen
Stofpad 4x4
083 399 2046
www.stofpad4x4.co.za
uys@stofpad4x4.co.za
LYNX 4X4 ACCESSORIES
JUDY PEARCE or ask for Charles
082 899 2426
011 021 0544 / 46 / 47
judy@lynx4x4.co.za