Page 1 of 1

Wiring Harness

Posted: Fri May 11, 2012 7:01 pm
by paw_by_paw
Hi Guys,
I know it is a long shot in the dark but maybe just maybe :(
Does anyone have or knows someone who has perhaps the main cable arrangement the runs from engine to gearbox,(for a 99 Blister 3.5 Automatic) starter,etc as mine is suspect due to previous neglect and ignorance from prevoius owner. :evil:
I have made a "boere plan" with glass tape but it looks terrible and like a real backyard job. :|
I had a look see at Parthunt but those cables have lying there on a heap in the open weather for quite some time and I do not think it worth the risk.
Another question :?: does anyone know where I can get hold of that heat shield covering that fits over this harness :?: I have searched all the local spares, auto electricals as well as cooling guys here locally seems, it is a no known item to them :?: :?: Any advice or reference will help.
Thanks

Re: Wiring Harness

Posted: Fri May 11, 2012 9:24 pm
by Ernie
Hi

Yes I have the complete diagram. I will upload it somewhere so you can download it. it is a zip containing all the diagrams of the different parts. I will post a link once done. I am not even going to try to email it as it is a huge zip file. :)

Re: Wiring Harness

Posted: Fri May 11, 2012 9:29 pm
by Ernie
As for the heat shield use this : http://www.autostyle.co.za/car-accessor ... ter-s.html

I have used it before and it works around cabling as well. You just have to glue it to the cabling with some contact adhesive.

Re: Wiring Harness

Posted: Sat May 12, 2012 12:44 am
by Ernie
Ok here is what I have.

1. wire diagrams : http://www.xtreme4x4sa.co.za/Downloads/ ... agrams.zip

2. Complete manual of about everything on a 99 Pajero. Note that the actual manual is for a Montero but you know that they are the same. there is a lot of numbered pdf's in there. you will have to scan through them (24.8 Mb) : http://www.xtreme4x4sa.co.za/Downloads/ ... t99-02.zip

Re: Wiring Harness

Posted: Sat May 12, 2012 10:29 pm
by paw_by_paw
Hi Ernie,
Thanks for that.
I was actually looking for the harness itself. hoped someone has 99 Blister Auto standing rusting somewhere that Could go and strip as mentioned Part Hunt's wire harnesses are a bit suspect. I can surely use the electrical diagrams. I am no Auto Elec but with patience I am sure I will figure it out somehow.
RGDS Chris